Round Black Floppy 10 Inch - 1 Device

The Round Black Floppy 10 Inch - 1 Device. Approximately 10" in length. Flexible rubber coating. Boot covers at connectors.

Features

• Length is approximately 10 inches.
• Machine made round floppy cables. 
• 2 Connectors for 1 Device
• Flexible rubber coating. 
• Boot covers at connectors.

Installation

Please remember these are floppy cables so it is normal for the wires to cross as is the case with all floppy drive cables.

First determine the pin 1 on both the floppy drive connector and floppy controller on the motherboard. The red wire will need to be placed at pin 1. Since the cable connectors are not notched you need to make sure that you have correctly determined the location of pin 1 on your floppy drive and motherboard connector. Here is a diagram of my motherboard and floppy drive connection. Yours may vary.

Reviews

• ClubOverclocker - "I have no doubt I'll be making a purchase for at least two more of these babies plus a floppy cable to match! Yes, I'm raving over these cables! Sometimes it's the simple things in life that make me happy.  I'm giving the Round ATA66/100 cables a well deserved perfect 5 plus ClubOC's Overclocking Seal Of Approval!"