Danger Den 5.25 Inch Single Bay Reservoir

Danger Den 5.25 Bay Reservoir - A good quality reservoir is an essential part of any water cooling system. The product is molded from high-density polyethylene for long term durability, and was specially designed to operate efficiently with high-pressure high-flow pumps. Fits in a 5.25 inch drive bay. CrazyPC is also including your choice of 3/8" or 1/2" barbs for use with this reservoir!

Please note this unit is identical to the Swiftech MCRES-525.

Options

Your choice of 1/2 or 3/8 inch hose barbs. Simply choose the desired barb from the menu located on the upper portion of this page. Please note plumbers tape or teflon is recommended (sold separately).

• 3/8 Inch Hose Barbs (DEFAULT) - 2 x 3/8 Inch Hose Barbs for use with 3/8 Inch ID tubing.
• 1/2 Inch Hose Barbs - 2 x 1/2 Inch Hose Barbs for use with 1/2 Inch ID tubing.
• Select the PC ICE Non-Conductive Water Cooling Coolant that is safe, non-toxic, and non-conductive making a perfect coolant for cooling your PC. This electrically non-conductive coolant will give peace of mind when it comes to water cooling.

Features & Benefits

Performance features, "Unrestricted Flow":

• Stepped down discharge compartment eliminates air entrainment into the pump: the powerful suction created by high-pressure high-flow pumps tend to create syphons in shallow reservoirs. The syphon entrains air bubbles into the pump inlet, causing it to cavitate. The stepped down compartment prevents this from occurring.
• Unrestricted inlet and discharge ports (3/8" NPT thread) allow power users to use large diameter tubing (up to 5/8" barbs).
• Dual inlet compartment allows the return of two devices installed in parallel (Chipset & VGA water-blocks, for example), thus reducing the overall pressure drop in the circuit.

Reliability Features, "Durable and safe":

• Durable blow-molded high-density polyethylene construction eliminates stress and aging related cracks commonly occurring with acrylic material.
• Reliable one piece construction eliminates the potential for leaks in the joints found in glued acrylic panel constructions.
• Threaded brass inserts for installation in the drive bay provide a secure assembly.
• 3/8" (NPT) tapered threaded ports provide industry standard safe and reliable seal.
• Fill-hole cap features an O-ring for a reliable seal.

Convenience Features, "User Friendly":

• Fits in any 5 1/4" drive bay, and installs like any other 5 1/4" device with industry standard fine thread screws (M3-0.5).
• Recessed sides in the forward section of the reservoir provide ample clearance to use most standard 5 1/4" bay covers.
• 3/8" (NPT) threaded ports offer the versatility to use a variety of fittings, from 1/4", 3/8", 1/2" or 5/8" barbs to quick-connect adapters.
• Large fill-hole for a quick system fill or refill.

NOTE: CrazyPC recommends to always test for leaking before installing within your system.