Dual Red Sound Activated Cold Cathode Kit 12 inch

The new Sound Sensitive CCFL kit includes an optional setting for sound sensitive mode and switching flash. This mode will allow the cathode to blink and react to sound waves in the area by an adjustable sensitivity knob which you can adjust it by thumb instead of by screwdriver.  Our CCFL kit puts out significantly more light than a neon kit, and are much thinner. In addition to this, the 100% acrylic casing allows an even distribution of light. 

Note: If purchasing the UV/Black light,  these lights do NOT give off a large amount of light, and are used in low-level lighting situations when day-glo or white components are in use. The Black light will cause them to "glow". It is not a standard light.

Options

• Cold Cathode Extension Cable. Extends the length of your cold cathode wiring. Connects with tubing wire to extend it up to 12 inches.
• The AC adapter to 12V 4pin Molex Connector is a great addition to any PC Techs toolkit. Allows you to hook up fans, Cathodes or anything else that uses the 4pin molex connector without having to take your PC apart. (Picture shown to right.)

Features

• Dual Sound Activated Cold Cathode Kit
• Includes 2 Cold Cathode tube (Length: 12.25 inches of pure light)
• Encased in a 100% acrylic shell, enabling 360 degrees of light
• Sound Controller with on/off function, flash, and sound activation. Comes with sound sensitivity control.
• 4pin power pass-through connector
• Square feet on each end of the acrylic tube with hook and loop strips for easy installation
• Enclosed inverter casing
• Dual 12VDC Inverter - Plug in 2 Cold Cathode Lights
• Long Lifespan

Pictures

Full Kit with inverter, acrylic tube, rocker switch, and 4pin pass thru.	Close-up shows acrylic tube end covered with end-cap	Sound Activation Module with on/off function.
Available colors are red, uv, blue, and green.	Sound Activated!