Instructions:
1. Make sure that the Mach II Drivers & Software 1.23 has been installed
2. Save the file to the harddisk.
3. Unzip the the file using a standard decompression tool found here.
4. Replace the original MCC.EXE file. Default Mach II software installation folder is: "\Program Files\nVENTIV\Mach II\".

Download :: Readme

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Replace the original PCC.EXE file. Default Prometeia software installation folder is: "\Program Files\Chip-con\Prometeia\".

Download :: Readme

Do not use this firmware unless you have start-up problems with the AMD 64 / FX compatible motherboards.

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Start the BOOTLOAD.EXE program. Default Prometeia software installation folder is: "Program Files\Chip-con\Prometeia". Point to the decompressed STE file and start the firmware upload procedure.

Download :: Readme

This firmware is the same as the 700 only the device manager names have been changed.

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Start the BOOTLOAD.EXE program. Default Prometeia software installation folder is: "Program Files\Chip-con\Prometeia".

Download :: Readme

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Start the BOOTLOAD.EXE program. Default Prometeia software installation folder is: "\Program Files\Chip-con\Prometeia\". Point to the decompressed STE file and start the firmware upload procedure.

Download :: Readme

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Replace the original BOOTLOAD.EXE file. Default Prometeia software installation folder is: "\Program Files\Chip-con\Prometeia\".

Download :: Readme

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Run the SETUP.EXE to start installation.

Download :: Readme

Instructions:
1. Save the file to the harddisk.
2. Unzip the the file using a standard decompression tool found here.
3. Run the SETUP.EXE to start installation.

Download :: Readme

Instructions:
This document has to be opened with a PDF reader. We recommend Acrobat Reader which can be found Here.

Download

Instructions:
This document has to be opened with a PDF reader. We recommend Acrobat Reader which can be found Here.

Download